Brakes are mainly used to control the rapid or decelerated parking of certain driving devices. They can be divided into hydraulic brakes and block brakes. They are widely used in automobiles, lifting, metallurgy, mining, ports, docks, construction machinery, etc. The brake that can be used correctly is very important. It not only helps to save fuel, but also ensures the safety of driving. The characteristics of this hydraulic brake product are mainly manifested in:

　　1. The main swing hinge points are equipped with self-lubricating bearings, with high transmission efficiency and no lubrication in use;

　　2. The main performance is safe and reliable, the braking is stable, and the action frequency is high.

　　3. Equipped with interlocking equal retreat device, which always keeps the equal retreat distance of the pads on both sides during use, avoiding the phenomenon of one side of the brake pad floating on the brake wheel due to uneven retreat;

　　4. The brake spring is arranged in the spring tube, and there is a braking torque scale on one side, which is convenient and intuitive to adjust;

　　5. The non-asbestos brake pads and brake shoes adopt a snap-fit ​​plug-in type, which is safe and reliable, and easy and fast to replace.

　　Compliance with standards: The installation dimensions meet the GB6333-86 standard, and the technical requirements meet the JB6406-2006 standard.

　　The ambient temperature of the hydraulic brake should be no lower than minus 20 degrees Celsius, and the high temperature should not be higher than 50 degrees Celsius. It is best not to use it in an environment with flammable and explosive objects.